Meta CollectionMosaic Tile in Steel by Stellar Tile

This tile is suggested for Interior Wall Applications for your Kitchen, Bath or Backsplash.

Sheet Backing: Mesh

Sheet Size: 10 1/4" x 12 1/4"

Tile Size: 1" x 2 1/2"

Tile Thickness: 5/16" (8mm)

Grout Joint: 1/8"

Material: Stainless Steel over Porcelain

Tile Finish: Brushed

Finish Shown: Steel

COF: C.O.F. rating wet .40 and dry .60: Somewhat skid resistant, not recommended for outdoor floor use

Frost Artisan: Interior Only

Water Absorption: Semi-Vitreous=Water absorption more than 3% but less than 7%. Indoor use. (example: wall tile, some floor tiles)

PEI: P.E.I. Rating I - Suitable for light duty floors, bathrooms and bedrooms without direct access from outside, no scratching dirt can be present, residential use only.

Tone: V1- UNIFORM (Differences among pieces from the same production run are minimal)

About this Material: Grade 304 is the standard "18/10" stainless; it is the most versatile and most widely used Stainless Steel, available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics. The balanced austenitic structure of Grade 304 enables it to be severely deep drawn without intermediate annealing, which has made this grade dominant in the manufacture of drawn stainless parts such as hardware, tools, sinks, hollow-ware and kitchen-ware. Grade 304 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections.